Product features:
●The spindle is equipped with Taiwan's original servo motor which has fast response, ow noise and stabe speed.
●The spindle is regulated by frequency conversion
●ALL castinas are subject to secondarytemperina treatment precision grinding after quenchingand the quide rail has good wear resistance and accuracyretention.
●The column guide rail is a large span double rectangular guide rai structure with arge support distance to meet the needof heavy cutting.
●The machine tool adopts an automaticubrication svstemto maintain the fulllubrication of each lubrication point and has the alarm function.
●The bed saddle joint surface adopts the plastic pasting process with ultra-high wear resistance.
●The worktabe has good wear resistance and precision reten- tion.
●The machine tool adopts a splash proof sheet metal protective structure to ensure a good workingenvironment
●The spindle adopts a tool cylinder mechanism,which allows fast tool change, ow noise and high efficiency.
●The numerical control system adopts Taiwan original products.
●It is widely used in the field of rough machining and heavy cutting.
Project | Unit | Model | |||
VC1850 | VC2260 | ||||
Workbench | Workbench dimensions (L × W) | mm | 1800×500 | 2200×600 | |
Maximum load of worktable | kg | 1000 | 1500 | ||
T-groove (groove number-groove width × pitch) | mm | 5-18×90 | 5-18×125 | ||
Coordinate range | Table left and right travel (X-axis) | mm | 1200 | 1600 | |
Table stroke forward and backward (Y-axis) | mm | 500 | 650 | ||
Headstock travel up and down (Z-axis) | mm | 600 | 600 | ||
Distance from spindle nose to worktable surface | mm | 100~700 | 100~700 | ||
Distance from the center of the main shaft to the guide surface of the column | mm | 855 | 855 | ||
Spindle | Spindle form | / | Gear drive | Gear drive | |
Spindle speed range | rpm | 50~2000 | 50~2000 | ||
Spindle taper | / | BT50/7:24 | BT50/7:24 | ||
Feed rate | Rapid movement speed (X/Y/Z) | m/min | 12/12/12 | 12/12/12 | |
Cutting feed speed | m/min | 1~10 | 1~10 | ||
Electric machinery | Spindle motor power | kW | 15 | 15 | |
Feed motor torque (X/Y/Z) | N.m | 18/18/28B | 18/18/28B | ||
Cold pump motor power | kW | 0.55 | 0.55 | ||
Precision | Positioning accuracy | mm | ±0.015/300 | ±0.015/300 | |
Repeated positioning accuracy | mm | ±0.012/300 | ±0.012/300 | ||
System | CNC system | / | SYNTEC 6M | SYNTEC 6M | |
Power source | Power supply | KVA | ≥30 | ≥30 | |
Air pressure | Air demand | kg/cm2 | ≥6 | ≥6 | |
Air source flow | m3/min | ≥0.5 | ≥0.5 | ||
Machine tool Size | Floor area (L × W × H) | mm | 3300×2900×3000 | 5000×3200×3000 | |
Machine weight (approx.) | kg | 6500 | 8000 |