GML SERIES SELECTION CONFIGURATION
●Two-speed gearbox
●Spindle center water outlet
●Tool magazine
●Right angle head, extension head
●Taiwan system or other systems
| Project | Unit | ModeL | ||||||
| GML2016 | GML3016 | GML4016 | GML2518 | GML3018 | GML4018 | |||
| Workbench | Workbench dimensions (L × W) | mm | 2000×1400 | 3000×1400 | 4000×1400 | 2500×1600 | 3000×1600 | 4000×1600 |
| Maximum load of worktable | kg | 5000 | 5000 | 6000 | 8000 | 6000 | 8000 | |
| T-slot (slot width) | mm | 7-22 | 7-22 | 7-22 | 7-22 | 7-22 | 7-22 | |
| Coordinate range | Table left and right stroke (X1 axis) | mm | 2200 | 3200 | 4200 | 2700 | 3200 | 4200 |
| Table stroke forward and backward (Y1 axis) | mm | 1600 | 1600 | 1600 | 1800 | 1800 | 1800 | |
| Workbench front and rear travel (Z-axis) | mm | 800 | 800 | 800 | 1000 | 1000 | 1000 | |
| Dragon Gate Width | mm | 1600 | 1600 | 1600 | 1800 | 1800 | 1800 | |
| Maximum workpiece size height | mm | 950 | 950 | 950 | 1200 | 1200 | 1200 | |
| Distance from the end of the spindle to the working table | mm | 150~950 | 150~950 | 150~950 | 200~1200 | 200~1200 | 200~1200 | |
| Spindle | Spindle form | / | Belt type | Belt type | Belt type | Belt type | Belt type | Belt type |
| Maximum speed of the spindle | rpm | 40.6000 | 40.6000 | 40.6000 | 40.6000 | 40.6000 | 40.6000 | |
| Spindle hole taper | / | BT50/φ190 | BT50/φ190 | BT50/φ190 | BT50/φ190 | BT50/φ190 | BT50/φ190 | |
| Feed rate | Rapid movement speed(X/Y/Z) | m/min | 20/20/15 | 20/20/15 | 20/20/15 | 20/20/15 | 20/20/15 | 20/20/15 |
| Cutting feed speed | mm/min | 1~10000 | 1~10000 | 1~10000 | 1~10000 | 1~10000 | 1~10000 | |
| Electric machinery | Spindle motor power | KW | 15/18.5 | 15/18.5 | 15/18.5 | 15/18.5 | 15/18.5 | 15/18.5 |
| Feed motor torque(X/Y/Z) | kW | 36/36/36 | 36/36/36 | 36/36/36 | 36/36/36 | 36/36/36 | 36/36/36 | |
| Cooling pump motor | kW | 0.75 | 0.75 | 0.75 | 0.75 | 0.75 | 0.75 | |
| Precision | Positioning(X/Y/Z) | mm | 0.025/0.020/0.015 | 0.03/0.020/0.015 | 0.03/0.020/0.015 | 0.025/0.020/0.015 | 0.025/0.020/0.015 | 0.035/0.020/0.015 |
| Repeated positioning accuracy(X/Y/Z) | mm | 0.014/0.012/0.010 | 0.014/0.012/0.010 | 0.014/0.012/0.010 | 0.014/0.012/0.010 | 0.014/0.012/0.010 | 0.014/0.012/0.010 | |
| Reingressive drive | Roller rail(X/Y/Z) | mm | 55/2;45/3;45/4 | 55/2;45/3;45/4 | 55/2;45/3;45/4 | 55/2;55/3;55/4 | 55/2;55/3;55/4 | 55/2;55/3;55/4 |
| Silk rod(X/Y/Z) | mm | 6316/5012/4012 | 6316/5012/4012 | 6316/5012/4012 | 6316/5012/5012 | 8016/5012/5012 | 8016/5012/5012 | |
| System | CNC system | / | FANUC Oi MF | FANUC OiMF | FANUC Oi MF | FANUC Oi MF | FANUC Oi MF | FANUC Oi MF |
| Power source | Power supply | KVA | 48 | 48 | 48 | 56 | 56 | 56 |
| Air pressure | Air demand | kg/cm2 | ≥6 | ≥6 | ≥6 | ≥6 | ≥6 | ≥6 |
| Air source flow | m³/min | ≥ 0.5 | ≥0.5 | ≥0.5 | ≥ 0.5 | ≥ 0.5 | ≥0.5 | |
Tool magazine( Optional match ) | Tool magazine form | / | Disc magazine | Disc magazine | Disc magazine | Disc magazine | Disc magazine | Disc magazine |
| Magazine capacity | pCS | 24 | 24 | 24 | 24 | 24 | 24 | |
| Maximum knife weight | kg | 18 | 18 | 18 | 18 | 18 | 18 | |
| Maximum knife diameter (full knife) | mm | 112 | 112 | 112 | 112 | 112 | 112 | |
| Maximum knife diameter (neighborhood empty knife) | mm | 200 | 200 | 200 | 200 | 200 | 200 | |
| Maximum knife length | mm | 300 | 300 | 300 | 300 | 300 | 300 | |
| Time to change the knife | S | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | |
| Machine tool dimensions | Floor area (L × W × H) | mm | 6430×3070×3680 | 8300×3050×4100 | 10300×3070×3680 | 7030×4050×4100 | 8500×4050×4100 | 10500×4050×4100 |
| Machine weight (approx) | kg | 18000 | 21000 | 24000 | 24000 | 27000 | 32000 | |
400-881-5651
Wechat
