ATC (Chain Type, 40/60T)
Full Closed-Loop Linear Scale
Right Angle Milling Head
Accessory Head
Face Plate / Rotary Table
FANUC System / or other CNC systems
| Item | Unit | PK130-A | PK130-B | PK130-C | PK6916-A | PK6916-B | |
|---|---|---|---|---|---|---|---|
| Worktable | Worktable Size (L×W) | mm | 1400×1600 | 1600×1800 | 1800×2200 | 2000×2500 | 2500×3000 |
| Max. Worktable Load | kg | 8000 | 15000 | 15000 | 40000 | 60000 | |
| T-slot (No. of slots-slot width×pitch) | mm | 9-22×160 | 9-28×160 | 7-28×200 | 7-28×250 | 7-28×320 | |
| Indexing Angle | ° | 0.001 | 0.001 | 0.001 | 0.001 | 0.001 | |
| Reference Bore Diameter | mm | Φ140H7 | Φ140H7 | Φ150H7 | Φ150H7 | Φ150H7 | |
| Travel Range | Worktable Lateral Travel (X-axis) | mm | 2500 | 3000 | 3400 | 3500 | 4000 |
| Headstock Vertical Travel (Y-axis) | mm | 2000 | 2000 | 2000 | 2000 | 3000 | |
| Column Longitudinal Travel (Z-axis) | mm | 1500 | 1500 | 1500 | 2000 | 2000 | |
| Boring Bar Travel (W-axis) | mm | 700 | 700 | 700 | 800 | 800 | |
| Ram Travel (U-axis) | mm | — | — | — | 700 | 700 | |
| Spindle | Spindle Diameter | mm | Φ130 | Φ130 | Φ130 | Φ160 | Φ160 |
| Spindle Taper | / | BT50 | BT50 | BT50 | BT50 | BT50 | |
| Spindle Speed Range | rpm | 10–2000 | 10–2000 | 10–2000 | 10–1000 | 10–1000 | |
| Max. Spindle Torque | Nm | 2590 | 3063 | 3063 | 3868 | 3868 | |
| Max. Axial Thrust Force | N | 25000 | 25000 | 25000 | 45000 | 45000 | |
| Spindle Motor Power | kW | 22 | 30 | 30 | 37 | 37 | |
| Number of Spindle Speed Ranges | — | 2 | 2 | 2 | 2 | 2 | |
| Transmission Type | / | Gear Drive | Gear Drive | Gear Drive | Gear Drive | Gear Drive | |
| Feed Rate | Rapid Traverse Speed (X/Y/Z/W/N) | m/min | 10/8/10/6 | 10/8/10/6 | 10/8/10/6 | 10/8/10/6 | 10/8/10/6 |
| Cutting Feed Rate (X/Y/Z/W/N) | mm/min | 5/4/5/3 | 5/4/5/3 | 5/4/5/3 | 5/4/5/3 | 5/4/5/3 | |
| Cooling | Coolant Pump Motor Power | kW | 0.75 | 0.75 | 0.75 | 0.75 | 0.75 |
| Accuracy | Positioning Accuracy (X/Y/Z/W/N) | mm | — | — | 0.018/0.025/0.018/0.025 | — | — |
| Repeat Positioning Accuracy (X/Y/Z/W/N) | mm | — | — | 0.015/0.02/0.015/0.02 | — | — | |
| Rotary Table Positioning Accuracy | ″ | 15 | 15 | 15 | 15 | 15 | |
| Rotary Table Repeat Accuracy | ″ | 4 | 4 | 4 | 4 | 4 | |
| System | CNC System | / | SIEMENS 828D | SIEMENS 828D | SIEMENS 828D | SIEMENS 828D | SIEMENS 828D |
| Power Supply | Power Supply | KVA | ≥80 | ≥80 | ≥80 | ≥95 | ≥105 |
| Air Pressure | Air Demand | kg/cm² | ≥6 | ≥6 | ≥6 | ≥6 | ≥6 |
| Air Flow Rate | m³/min | ≥0.5 | ≥0.5 | ≥0.5 | ≥0.5 | ≥0.5 | |
| Machine Dimensions | Floor Space (L×W×H) | mm | 6400×5700×4800 | 6800×6100×5100 | 7800×6800×5100 | — | — |
| Machine Weight (Approx.) | kg | 30000 | 40000 | 43000 | 100000 | 120000 | |
| Note | Technical parameters are subject to change without prior notice. | ||||||
400-881-5651
Wechat
