| Worktable |
|
|
|
|
|
|
| Worktable Size (L×W) | mm | 2100×700 | 2600×700 | 4000×550 | 4500×550 | 5000×550 |
| Max. Worktable Load | kg/m² | 1000 | 1000 | 3000 | 3000 | 3000 |
| T-slot (No.-Width×Pitch) | mm | 5-18×135 | 5-18×135 | 5-18×100 | 5-18×100 | 5-18×100 |
| Travel Range |
|
|
|
|
|
|
| Table Travel (X-axis) | mm | 2000 | 2500 | 3000 | 3500 | 4000 |
| Column Travel (Y-axis) | mm | 750 | 750 | 550 | 550 | 550 |
| Headstock Travel (Z-axis) | mm | 700 | 700 | 600 | 600 | 600 |
| Distance from Spindle Face to Worktable | mm | 50~750 | 50~750 | 200~800 | 200~800 | 200~800 |
| Spindle |
|
|
|
|
|
|
| Spindle Type | / | Direct Drive | Direct Drive | Direct Drive | Direct Drive | Direct Drive |
| Max. Spindle Speed | rpm | 12000 | 12000 | 12000 | 12000 | 12000 |
| Spindle Taper | / | BT40 | BT40 | BT40 | BT40 | BT40 |
| Spindle Outer Diameter | mm | Φ150 | Φ150 | Φ150 | Φ150 | Φ150 |
| Feed Rate |
|
|
|
|
|
|
| Rapid Traverse (X/Y/Z) | m/min | 20/36/36 | 20/36/36 | 32/32/32 | 32/32/32 | 32/32/32 |
| Cutting Feed Rate | m/min | 1~10 | 1~10 | 1~10 | 1~10 | 1~10 |
| Motor |
|
|
|
|
|
|
| Spindle Motor Power | kW | 7.5/11 | 7.5/11 | 7.5/11 | 7.5/11 | 7.5/11 |
| Feed Motor Torque (X/Y/Z) | N.m | 20/20/20B | 20/20/20B | 27/27/27B | 27/27/27B | 27/27/27B |
| Coolant Pump Motor | kW | 0.55 | 0.55 | 0.55 | 0.55 | 0.55 |
| Accuracy |
|
|
|
|
|
|
| Positioning Accuracy | mm | 0.012/300 | 0.012/300 | 0.05/0.012/0.012 | 0.05/0.012/0.012 | 0.05/0.012/0.012 |
| Repeat Positioning Accuracy | mm | 0.008 | 0.008 | 0.05/0.008/0.008 | 0.05/0.008/0.008 | 0.05/0.008/0.008 |
| System |
|
|
|
|
|
|
| CNC System | / | FANUC | FANUC | FANUC | FANUC | FANUC |
| Power Supply |
|
|
|
|
|
|
| Power Supply | KVA | ≥30 | ≥30 | ≥30 | ≥35 | ≥40 |
| Air Pressure |
|
|
|
|
|
|
| Air Requirement | kg/cm² | ≥6 | ≥6 | ≥6 | ≥6 | ≥6 |
| Air Flow | m³/min | ≥0.5 | ≥0.5 | ≥0.5 | ≥0.5 | ≥0.5 |
| Tool Magazine |
|
|
|
|
|
|
| Tool Magazine Type | / | Disc Type ATC | Disc Type ATC | Disc Type ATC | Disc Type ATC | Disc Type ATC |
| Tool Magazine Capacity | pcs | 24 | 24 | 24 | 24 | 24 |
| Avg. Tool Change Time (Tool-to-Tool) | sec | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 |
| Machine Dimensions |
|
|
|
|
|
|
| Floor Space (L×W×H) | mm | 4900×3100×3100 | 5900×3100×3100 | 6900×3100×3100 | 7900×3100×3100 | 8900×3100×3100 |
| Machine Weight (Approx.) | kg | 7000 | 8500 | 10500 | 11500 | 13500 |
| Technical specifications are subject to change without prior notice. |
400-881-5651
Wechat
